Hartman Industries, LLC is an industry leader in the field of plastic injection molding. With state-of-the-art design capabilities, Hartman…
I need help with this assignment, instead of a written paper is must be a PowerPoint Presentation: I will need one to focus on the Introduction & Identify a quality management system for process of improvement for Hartman Industrials (ISO/9000). My main focus is on how the ISO/9000 will help improve the process at the Michigan Plant. Need at least two references, I can also send the PowerPoint Presentation Slides if needed, please let me know if you would like for me to send the PowerPoint, if so only thing you would have to do is add to them. Also find the attachment to be used in doing any research.
Thanks
Terry
ATTACHMENT PREVIEW
Download attachment
Hartman Industries, LLC is an industry leader in the field of plastic injection molding. With
state-of-the-art design capabilities, Hartman Industries create innovative plastic designs that have
earned international acclaim. Attention to detail, extreme precision, and high quality control
standards are the hallmarks of Hartman Industries. We have the capacity to fulfill your unique
needs and have facilities across the country, including locations in: San Jose, California; Albany,
Georgia; Pontiac, Michigan; and Hangzhou, 论文帮助/论文写作服务/负担得起我及时提交我最好的质量 – China.
Our Focus
•
Hartman Industries defines its company attitude and abilities by applying Six Sigma,
exceeding ISO 9000 standards, and engaging in innovative research and development
(R&D).
•
Hartman Industries aims to provide solutions to customer challenges through the use of
high-quality polymer materials.
•
The Hartman Industries R&D Department strives to maintain its position as the industry
leader by continuously identifying industry trends.
•
The Pontiac plant handles the production of custom plastic pieces. The plant is also responsible
for the production of all medical products produced by the company.
•
Receiving Department
•
The receiving department accepts the delivery of raw materials shipped to the company by truck.
•
The raw materials, or inputs, are:
•
•
1. High-density polyethylene (HDPE) plastic pellets
•
•
2. Colorizing dyes
•
•
3. Paper
•
•
4. Cardboard
•
•
5. Plastic film
•
•
6. Styrofoam packaging peanuts
•
•
7. Adhesives
•
•
8. Ink
•
•
9. Steel stock
•
•
10. Aluminum stock
•
•
11. Abrasive grinding and cutting wheels and bits
•
•
12. Solvent cleaners
•
•
13. Lubricating oils
•
•
14. Mold release agents
View the Answer
•
•
15. Electricity
•
•
16. Natural gas
•
•
17. Light bulbs
•
•
The desired product is comprised of inputs sent to the mixing or mold fabrication departments.
•
The possible byproducts, wastes, or outputs, from this department are:
•
•
1. Particulates from the handling of damaged bags of dyes that may cause air pollution
•
•
2. Off-spec raw materials managed as a waste
•
•
3. Spilled materials that may cause land and water pollution
•
•
4. Wasted energy from lighting, heating, and processing equipment
•
•
If possible, off-spec raw materials are returned to the vendor for credit. Otherwise, the material is
treated as waste and sent to a landfill.
•
Mold Fabrication Department
•
The custom plastic pieces produced by the plant are usually specialized, unique, or limited-run
items. The molds used in the production of these custom pieces are fabricated in-house. The
department also fabricates the molds for new designs, as ordered by the Research and
Development department in San Jose, CA. If a new design is put into production at the Georgia
or 论文帮助/论文写作服务/负担得起我及时提交我最好的质量 – China plants, the molds used for the production machines would be purchased from a third-
party mold maker.
•
The inputs are:
•
•
1. Steel stock
•
•
2. Aluminum stock
•
•
Page | 1
Show entire document
